Zum Inhalt springen 
Pontiac V8
265, 301, 307*, 326, 350, 389, 400, 421, 428, 455
Zündfolge
| Beschriftung | Drehrichtung |
 |  Finger dreht: gegen die Uhrzeigerrichtung* (*307 dreht in Uhrzeigerrichtung!) |
Anzugsdrehmoment
Achtung! diese Daten sind ohne Gewährleistung.
Bitte Baujahr- und modellabhängige Abweichungen prüfen.
Bitte immer in drei gleichmäßigen Durchgängen anziehen.
| Bolts or Parts | Lube or Sealer | Torque to: |
| Main Caps | Engine Oil | 95 ft-lbs. |
| Rear Main Cap | Engine Oil | 120 ft-lbs. |
| Warning!!! If you are using ARP bolts, you MUST use their specs. Click Here! | ||
| Connecting Rod Bolts | Assembly Lube | 45 ft-lbs. |
| SD Connecting Rod Bolts | Assembly Lube | 65 ft-lbs. |
| Cylinder Heads | Engine oil | 95 ft-lbs. |
| Rocker Studs (screw-in) | Engine Oil | 55 ft-lbs. |
| Rocker Arm Nuts (Non-Adjustable Rockers) | Assembly Lube | 20 ft-lbs. |
| Oil Pump Bolts | Engine Oil | 30 ft-lbs. |
| Oil Pump Cover Bolts | Engine Oil | 15 ft-lbs. |
| Windage Tray | Engine Oil | 15 ft-lbs. |
| Oil Pan | Engine Oil | 12 ft-lbs. |
| Camshaft Thrust Plate | Engine Oil | 15 ft-lbs. |
| Cam Sprocket/Timing Gear (upper) | Thread Locker | 45 ft-lbs. |
| Timing Cover to Block | Engine Oil | 35 ft-lbs. |
| Water Pump to Cover | Engine Oil | |
| Single Timing Cover to Intake bolt | Install rubber o-ring with light RTV silcone | 10 ft-lbs. |
| Valley Pan Bolts | Engine Oil | 15 ft-lbs. |
| Intake Manifold (Cast Iron Heads) | Non- Hardening Sealer | 40 ft-lbs. |
| Valve Cover | Engine Oil | 8 ft-lbs. |
| Exhaust Manifold | Anti-Seize Lubricant | 30 ft-lbs. |
| Spark Plugs | No Lube or Sealer | 20 ft-lbs. |
| Flexplate (Automatic) Flywheel (Clutch) | Thread Locker | 95 ft-lbs. |
| Clutch Pressure Plate | Thread Locker | 25 ft-lbs. |
| Centerbolt (Harmonic Damper) | Thread Locker | 160 ft-lbs. |
| Bellhousing (Transmission to Block) | Engine Oil | 40 ft-lbs. |
