Zum Inhalt springen 
Anzugsdrehmoment – Chrysler HEMI 426
Zündfolge
| Beschriftung | Drehrichtung |
 |  Finger dreht: gegen die Uhrzeigerrichtung |
Anzugsdrehmoment – Chrysler HEMI 426
Achtung! diese Daten sind ohne Gewährleistung.
Bitte Baujahr- und modellabhängige Abweichungen prüfen.
Bitte immer in drei gleichmäßigen Durchgängen anziehen.
| Bolts or Parts | Lube or Sealer | Torque to: |
| Main Caps | Engine Oil | 100 ft-lbs. |
| Main Cap Tie Bolts | Engine Oil | 45 ft-lbs. |
| Warning!!! If you are using ARP bolts, you MUST use their specs. Click Here! | ||
| Connecting Rod (7/16 bolts) | Engine Oil | 75 ft-lbs. |
| Cylinder Heads Iron Heads Aluminum Heads | Engine oil (blind hole) Sealer (water jacket) | 75 ft-lbs. 70 ft-lbs. |
| Camshaft Cap Screw (Steet HEMI) | Thread Locker | 40 ft-lbs. |
| Camshaft Cap Screw (Race HEMI) | Thread Locker | 75 ft-lbs. |
| Rocker Shaft brackets | Engine Oil | 30 ft-lbs. |
| Oil Pump | Engine Oil | 35 ft-lbs. |
| Oil Pan | Engine Oil | 15 ft-lbs. |
| Timing Cover | Engine Oil | 10 ft-lbs. |
| Intake Manifold (Cast Iron Heads) | Non- Hardening Sealer | |
| Valve Cover | Engine Oil | 6 ft-lbs. |
| Exhaust Manifold | Anti-Seize Lubricant | 30 ft-lbs. |
| Spark Plugs | No Lube or Sealer | 20 ft-lbs. |
| Flexplate/Flywheel Cap Screws | Thread Locker | 70 ft-lbs. |
| Centerbolt (Harmonic Damper) | Engine Oil | 135 ft-lbs. |
| Bellhousing (Transmission to Block) | Engine Oil | 50 ft-lbs. |
