Zum Inhalt springen 
361, 383, 400, 413, 426 (Wedge), 440, B/RB Engines
Alle Daten wie Anzugsdrehmomente – Big Block Chrysler, Zündfolge und Blockbeschriftung.
Big Block Chrysler
361, 383, 400, 413, 426 (Wedge), 440, B/RB Engines
Zündfolge
| Beschriftung | Drehrichtung |
 |
Finger dreht: gegen die Uhrzeigerrichtung |
Hier die Anzugsdrehmomente – Big Block Chrysler
Achtung! diese Daten sind ohne Gewährleistung.
Bitte Baujahr- und modellabhängige Abweichungen prüfen. Bitte immer in drei gleichmäßigen Durchgängen anziehen.
| Bolts or Parts | Lube or Sealer | Torque to: |
| Main Caps | Engine Oil | 85 ft-lbs. |
| Warning!!! If you are using ARP bolts, you MUST use their specs. Click Here! | ||
| Connecting Rod Bolts (Plain) | Engine Oil | 45 ft-lbs. |
| Connecting Rod Bolts (Heavy Duty) | Engine Oil | 55 ft-lbs. |
| Crankshaft Rear Bearing Seal | Engine Oil | 30 ft-lbs. |
| Cylinder Heads
Iron Heads | Engine oil
(blind hole) Sealer (water jacket) |
70 ft-lbs. |
| Rocker Shaft brackets | Engine Oil | 25 ft-lbs. |
| Oil Pump Cover | Engine Oil | 10 ft-lbs. |
| Oil Pump | Engine Oil | 35 ft-lbs. |
| Oil Pan | Engine Oil | 15 ft-lbs. |
| Camshaft Locking Bolt | Thread Locker | 35 ft-lbs. |
| Timing Cover | Engine Oil | 10 ft-lbs. |
| Intake Manifold
(Cast Iron Heads) | Non- Hardening Sealer | 40 ft-lbs. |
| Valve Cover | Engine Oil | 6 ft-lbs. |
| Water Pump | Non- Hardening Sealer | 30 ft-lbs. |
| Fuel Pump | Engine Oil | 30 ft-lbs. |
| Starter mounting Bolts | Engine Oil | 50 ft-lbs. |
| Exhaust Manifold | Anti-Seize Lubricant | 30 ft-lbs. |
| Spark Plugs | No Lube or Sealer | 20 ft-lbs. |
| Flexplate/Flywheel Cap Screws | Thread Locker | 55 ft-lbs. |
| Flexplate to Torque Converter | Thread Locker | 270 in-lbs. |
| Centerbolt
(Harmonic Damper) | Engine Oil | 135 ft-lbs. |
| Bellhousing
(Transmission to Block) | Engine Oil | 50 ft-lbs. |
